Commercial Roof & Gutter Cleaning

1. Site Assessment & Safety Setup

We begin with a rooftop inspection—identifying gutter blockages, moss patches, damaged shingles or flashing issues. A detailed SWMS (Safe Work Method Statement) is prepared to ensure full WHS compliance, and fall‐protection equipment is set up.

2. Debris Removal & Gutter Clearing

Using non‐invasive tools (hand scoops, gutter vacs, leaf blowers), we remove leaves, sticks and debris from gutters and downpipes. We flush gutters with purified water to confirm free flow and inspect for any leaks or cracks.

3. Roof Surface Cleaning & Moss Treatment

For roofs, we apply a biodegradable moss‐ and algae‐killer, allow it to dwell, then gently rinse with low‐pressure water. This prevents shingle damage while removing slippery, hazardous growth. Any loose debris is carefully cleared to exposed roof areas.

4. Final Inspection & Protective Application

After cleaning, we perform a final walkthrough—checking gutter integrity, flashing seals and roof condition. If desired, we apply a protective moss‐inhibitor or water‐repellent coating to extend the time between cleans.

All methods comply with SafeWork NSW’s approach to WHS regulation

Working at heights without the proper training, safety gear, or insurance puts building managers and staff at serious risk. Roof and gutter cleaning isn’t just a messy job — it’s a dangerous one.

• Falls from ladders and roofs are one of the leading causes of workplace injury
• Improper debris removal can damage roofing membranes and drainage systems
• DIY attempts may void your building’s insurance policy

Our team is fully trained in high access cleaning methods, using certified EWP, harnesses, and fall prevention systems. We carry $20M public liability insurance and follow strict SafeWork NSW safety protocols on every site.

Protect your team and your asset — leave it to the professionals at 101 Pro Clean.